Introduction
Halogen Acid Gas Tube Furnace is used to test the acidity of the
gas that released during combustion from cable or optical cable
components material. The equipment is designed and produced on the
basis of GB/T 17650 and IEC 60754. The cable material is processed
by prius tube furnace, and then the pH value and conductivity of
the gas that generated in combustion process are measured,so that
the cable material of acidic,as well as concentration of halogen
acid gas volume, PH, conductivity, etc, can be determined.
Standards
GB/T 17650.1~2-1998 , IEC 60754-1/2-1994, EN 50305, BS 6853, GB/T
19666-2005, GA 306.2-2007, UL 2556-2007
Features
1. Halogen Acid Gas Tube Furnace is designed with optimized
structure, logical layout, and easy to operated.
2. All the fixtures are made of stainless steel.
3.The effective length of the tube-type furnace is 500 ~ 600mm,
inner diameter is 40 ~ 60mm, with adjustable electric systems.
4. Equipped with imported thermocouple from United States.
5. The size of the combustion boat is length 45 ~ 100mm, width 12 ~
30mm, depth 5 ~ 10mm.
6. The electrical conductivity measuring range is 0.01uS / mm ~
100uS / mm.
7. The control system using an electronic temperature control,
intelligent control tube furnace temperature.
8. Equipped with two gas collection bottles.
9. The size of the sample chamber is 1 liter.
10. Equipped with a PH value and conductivity detector, with an
electronic display and an electrode.
11. Air flow meter is equipped with silicon dioxide fire pipeline
to prevent corrosion by the gas.
12. Activated carbon (air filter): filter air through a filter.
13. The silicone is used for drying air source.
14. Pyrex pipeline: Users can easily insert sample into the Prius
tube to protect the pipeline from damage.
15. Combustion boat moving system: combustion boat moves automatic
to achieve more intelligent test.
16. The mode switching: mode switch (two test methods to choose
from, IEC 60754-1 & IEC 60754-2).
17. The temperature alarm system: control the furnace temperature
against overheating.
18. Timer: IEC 60754-1 or IEC 60754-2 time measurement device.
19. Drawer:used to store parts of the box (such as conductivity
meters, pH meter, etc.)
20. Temperature indicator: shows the furnace core temperature.
| Activated carbon (air filter) | filter air through a filter |
| Timer | IEC 60754-1 or IEC 60754-2 time measurement device. |
| Temperature indicator | shows the furnace core temperature |
| Dimension | test device 1500(W)*450(D)*400(H)mm |
| Control chamber | 400(W)*400(D)*240(H)mm |
| Power | AC220V 50HZ, 25A |
