ASTM D5132 Automobile Interior Material Combustion Testing Machine
Application field:
This combustion testing machine is usually applied to auto
(car,multipurpose passenger coach and truck) interior material's
horizontal combustion characteristics.
Certification:
Meets GB8410 2006,ISO379,ASTM D5132,TL1010,GM6090M,DIN7520,GM9070P,
FMVSS 302,JIS D 1201,JASO M403,ISO 3795,ASTM D5132 and other
equivalent test standard.
Testing method:
The sample was put horizontally on the U shape bracket, a small
flame lighted at the sample free end for 15s in the combustion
chamber. Record whether the flame extincted,or when it will
extinct. And the sample burning distance, burning time for this
distance.
Data read: Burning time, remaining flame time, burning distance
Testing result: the burning speed V(mm/min) converts as the
following formula:V=60X(L/T). L means the burning distance(mm); T
means the needed time to burn this distance(s). The biggest burning
speed is the testing result.
Component:
Burning system: Anti-corrosive combustion box, gas burner nozzle
with 9.5mm diameter; automatic ignition control system,
intake/exhaust system
Timing system: burning timer, afterflame timer
Testing fixture: Two pieces of U shape frame made from corrosion
resistant metal plate. Under one of the frame, there are 0.25mm
diameter heat resistant metal wire with the distance of 25mm.
Glass observation window: In the front of combustion chamber is a
heat resistant glass observation window to see the burning speed
change when burning.
Stainless steel chamber: below the chamber, there are ten vents
with diameter 19mm, the walls of the vent is near the top, and
there is ventilation slot with 13mm width. The whole combustion
chamber is supported by four feets with 10mm height. A small hole
for inserting thermometer is on the top of combustion chamber and
20mm far from the frame.
Main parameters:
| Metal cover size(L*W*H) | 385*204*360mm |
| Bottom ventilation hole distance | transverse 63.5mm; portrait 127mm |
| Bottom ventilation hole | 10(number), diameter 19mm |
| Ventilation slot | 360*13mm |
| Bottom support | 10mm |
| Gas burner nozzle internal diameter | 9.5mm |
| Combustion flame | 38mm |
| Catch tray | 335*85mm |
| Thermometer | MAX:150ºC |
| Steel ruler | accuracy 0.1mm |
| Gas | liquefied gas |
| Power supply | 220V/50Hz |
Nozzle center is 19mm far from the sample free end center
The sample bottom is 178mm far from the bottom surface
The sample bracket front is 22mm far from internal surface of the
combustion chamber
1. The second longitudinal outside of test bracket is 50mm far from
combustion chamber inside
2. The first supporting point of test bracket is 38mm far from the
front
3. The second supporting point of the test bracket is 100mm far
from the first supporting point
4. The third supporting point of the test bracket is 254mm far from
the second supporting point
5. Heat resisting metal wire diameter: 0.25mm
6. Spacing between the heat resisting metal wire: 25mm
7. The metal wire length is more than 110mm, there are 7-8 around
tooth per 25mm
8. Timer setting: 15s(0-99.99/S/M/H adjustable)
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District
(Dongguan City, Guangdong Province,China),a famous historical town
with prosperous industry and convenient transportation.
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of
YUYANG in this field, and established as an crucial role in R&D
on high quality and high-cost performance of testing equipment.
YUYANG's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, lithium battery, LED,
photoelectricity, mobile, plastic and rubber, display,
telecommunication, chemical industry, aerospace, building material
and product, wire and cable, toys, furniture, textile and fabrix,
etc. All YUYANG testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
DONGGUAN YUYANG INSTRUMENT CO.,LTD looks forward to cooperating
with customer all over the world.
If you are interested in any of our products or would like to
discuss a custom order. Please feel free to contact us. We are
looking forward to forming succesful business with new clients
around the world in the near future.
Certification
Customer Evaluation
