10kW/M2 ~ 80 KW/M2 Adjustable Protective Clothing Against Radiant
Heat Tester
Description:
This Protection Against Radiant Heat Test Equipment is designed
according to ISO6942 and EN366.
The test equipment has a user-friendly, intuitive, Windows-based
application that provides a complete thermal control, fault
detection and data recording. RPP system configuration and burn
prediction also included in the Thermo DAC.
User-defined test allows the operator to define non-standard test
conditions and custom tolerances. You can view multiple graphs
display with zoom feature to view specific conditions in details.
Real-time statistics can be applied to the test data within any
user selected time range.
This Protection Against Radiant Heat Test Equipment is used for
performance evaluation against heat and flame protective clothing
when faced with short flame thermal motion. Imposed certain calorie
density (80KW/m ² ± 5%) of heat, under the specimens that composed
of protective clothing. When measuring the growth rate of heat
through over time (time: seconds, temperature: ºC) by heat meter
that installed on test sample, to determine the insulation
properties of sample materials.
This Protection Against Radiant Heat Test Equipment is also applied
to measure the fabric of single-layer or multi-layer under high
temperature thermal radiation properties, and fire-retardant
insulation of plates.
Standards:
EN 366: Protective clothing. Protection against heat and fire.
Method of test: evaluation of materials and material assemblies
when exposed to a source of radiant heat.
ISO 6942: specifies two complementary methods (method A and method
B) for determining the behavior of materials for heat protective
clothing subjected to heat radiation.
Features:
1, The Protection Against Radiant Heat Test Equipment consists of
radiation device, the specimen clamping device and control system;
2, Stainless steel frame structure, appearance, corrosion
resistance, easy to clean;
3, Specimen size: 230mm x 80mm;
4, Radiation source is made up of 5 infrared quartz lamp, power
500W, and provide at least 80kW/m2radiant heat;
5, Standard copper heat flow meter, heat measuring range
0~100kw/m2;
6, A cooling device (cooling water inlet);
7, Intelligent water circulation control system;
8, The water temperature alarm function; ensure the safe operation
and test stability;
9, Computer control system; to achieve more intelligent test and
easy to operate;
10, Timer accuracy is 1s;
11, Constantan thermocouple: measurement Accuracy 0.1 ºC, meet the
design requirements of ISO 6942
12, Metal protection shutters, with water cooling device;
13, Computer records and displays real-time continuous temperature
curve;
14, Automatic operation mode, test time can be set freely.
15, According to ISO 6942-2002 (EN366) standards, there are two
methods to test the thermal protection.
The first method (A method) is a specimen to withstand a certain
amount of heat radiation, recording changes in appearance in order
to reproduce the material the inclement conditions.
The second method (B method) is a calorimeter inside a specimen
back, when heat conduction from samples back, recording temperature
trends over time, in order to determine the level of thermal
radiation transfer.
Specification:
| Thermocouple | Copper, Constantan (T); diameter: 0.25mm |
| Calorimeter | Copper Specifications: Thickness 1.6 mm; purity: 99.95% |
| Press Release Plate | Specification:149×149×6t mm(center:φ90mm hole)weight:264±13g |
| Heat flux density | 10kW/m2 ~ 80 kW/m2 adjustable |
| Thermal radiation temperature control | Room temperature ~ 1200ºC ± 5ºC (display accuracy of 1ºC; having
PID smart regulation Controller |
| Thermal radiation temperature sensor | Thermocouple (0 ~ 100ºC) |
| Circulating pump | HQB-3900/100W/220V/50Hz |
| Operating platform | Windows operating systems |
| Flame shield plate | Operation: manual/automatic front pulled way; Material: heat-resistant inorganic-based thermal materials |
| Power | AC 220V 50Hz |
| Outline dimension | W1510×D650×H1220mm |
| Weight | About 200kg |
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District
(Dongguan City, Guangdong Province,China),a famous historical town
with prosperous industry and convenient transportation.
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of
YUYANG in this field, and established as an crucial role in R&D
on high quality and high-cost performance of testing equipment.
YUYANG's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, lithium battery, LED,
photoelectricity, mobile, plastic and rubber, display,
telecommunication, chemical industry, aerospace, building material
and product, wire and cable, toys, furniture, textile and fabrix,
etc. All YUYANG testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
DONGGUAN YUYANG INSTRUMENT CO.,LTD looks forward to cooperating
with customer all over the world.
If you are interested in any of our products or would like to
discuss a custom order. Please feel free to contact us. We are
looking forward to forming succesful business with new clients
around the world in the near future.
Certification
Customer Feedback
