BS EN136-1998 Medical Surgical Mask Flame Retardant Tester (800 ±
50) ℃
Description:
The Flammability test procedure evaluates the flammability of
medical textiles including face masks, surgical gowns, and drapes.
The test method is designed to comply with 16 CFR Part 1610. This
test is required by the ASTM F2100 (Standard Specification for
Performance of Materials Used in Medical Face Masks) to ensure that
all face masks meet the requirements for Class 1 flammability.
Testing is also required for 510(k) submissions to the FDA. In
addition to the Flammability test, Nelson Labs can perform all ASTM
F2100 testing.
Standard: GB 19083-2010 medical protective mask technical requirements
Scope:
It is the special test equipment mainly used for testing medical
masks flame retardant properties.
Instrument Description:
The device is a mask with a head mold at a certain line speed after
contact with the flame, then test the burning performance on masks.
Main feature:
1, PLC + touch screen control system; make test more convenient
operating, visualization;
2, mask fixture for the metal body head mold, can fully simulate
the actual use of the state mask.
3, the burner height can be adjustable
4, automatic timing positioning made by the burner
5, burning time, fire-retardant time are automatically recorded,
show the figures.
6, with a flame temperature measurement probe, flame temperature
display.
7, automatic control system, automatic ignition;
8, the burner with propane (liquefied gas) and other combustible
gas interface.
9, automatic timing, automatic storage of test data; easy access to
experimental reports
Specifications:
1, head mold automatic movement line with the speed of (60 ± 5) mm
/ s
2, the height of the flame can be adjusted to 40 ± 4mm
3, with a flame temperature measurement detection thermocouple
4, the flame from the top of the burner height is(20 ± 2) mm, the
temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point
of the mask is (20 ± 2) mm
6, the burner height adjustment range of 30mm
7, metal head mold wall thickness of 2 ~ 3mm, resistant to flame
burning
8, continued burning time and smoldering time timer: 0 ~ 9999.9
seconds, accuracy: ± 0.1 seconds
9, the power supply: AC220V, 50Hz, 50W
10, Weight: about 30kg
| Temperature | (800 ± 50) ℃ |
Burner Height Adjustment Range | 30mm |
| Metal Head Mold Wall Thickness | 2 ~ 3mm |
| Time timer | 0 ~ 9999.9S |
| Accuracy | ± 0.1 |
| Weight | About 30kg |
